恒涌防爆风机: (020) 8106 1320
邮箱: hy@gd-ex.com
QQ: 892050483, 973469088
邮箱: hy@gd-ex.com
QQ: 892050483, 973469088
AMY-防爆月弯管(dⅡ)
1.爆炸性气体环境1区 2区
2.爆炸性气体混合物IIA IIB IIC环境
3.钢管配线时作为管路连接的一个防爆部件
Can be used in Zone 1 and Zond 2 dangerous places.
Can be used in IIA,IIB IICgroup explosive atmosphere.
During wiring it is considered as one of explosion-proof part in steel pipe connection
1.防爆月弯管由高强度铸铝合金铸造成形
2.高强度 重量轻 表面喷塑耐腐蚀 防腐等级;WF2
3.两端为英制55度圆柱管螺纹(隔爆螺纹精度6H/6g)
4.防爆标志;Exd II
5.啮合扣数只少为5扣时,防护等级为IP65
Explosion-proof Moon-shaped Bend is cast and molded with high-strength aluminum alloy
High intensity light weight surface sprayed and corrosion resistant WF2 Anticorrosive Class;WF2
Both ends are 55 degree (in British measurement)parallel pipe thread (precision of the flameproof thread;6H/6g)
Explosion-proof mark;Exs ll
When the number of joggle is at least 5 the protection class is lp65
BXJ-59 不锈钢防爆接线箱(e)
1.爆炸性气体环境1区 2区
2.爆炸性气体混合物IIA IIB IIC类
3.爆炸性粉尘环境21区 22区
4.温度组别;T1-T4
Can be used in Zone 1 and Zond 2 dangerous places.
Can be used in IIA,IIB IICgroup explosive atmosphere.
Can be used in 21&22 group explosive atmosphere.
Temperatur classes：T1-T4
1.外壳由不锈钢板精致焊接成型,造型美观实用
2.防水 防尘 防腐 防静电 防燥
3.进线口方向 规格 端子数由用户自由送配
4.钢管或电缆布线均可
.The shell is refined welded and molded with stainless steel plates and its appearance is very beautiful and practical
.Waterproof dustproof anticorrosive counter static and anti-dryness
.The inlet s directions specification and number of terminals are freely delivered and matched by the user
.lt can be wired either with steel tubes or cables
BHD52防爆吊顶接线盒(ⅡB ⅡC e)
1.1区 2区危险场所.
2.IIA IIB IIC类爆炸性气体环境.
* 如要求增安型请注明
1.Can be used in Zone l and Zone 2 dangerous places.
2.Can be used in IIA IIB IICgroup explosive atmosphere
*Please note if want safety-increased type
进线口螺纹(G〃):G3/4
电缆外径(φ,mm):10～14
防护等级:IP55 *IP65
防爆标志:Exd ll BT6 Exd llT5
产品名称
MFB防爆密封胶泥
1.爆炸性气体混合物危险场所;1区 2区
2.爆炸性气体混合物 IIA IIB IIC
1. 具有良好的柔软性、抗老化性，高温不流淌，低温不脆裂；
2. 对金属、电缆外皮等有良好的附着力，并具有良好的气密性和不传爆能力；
3. 无味、无毒、无腐蚀性，施工、维修方便；
4. 配合使用防爆密封隔离密封管接头，防爆效果更佳。
1. 耐热度：90℃，五小时不流淌，不起泡；
2. 耐低温：-50℃，无变化；
3. 可塑性：5～10mm；
4. 密封性：填入G2″的隔离密封盒内，待固化后施加50KPa的水压，保1min，不滴水，无位移；
5. 防爆性：32.2%混合氢气传爆试验，不传爆；
6. 击穿电压：2.5mm厚的试件耐压一分钟，大于4KV无击穿闪络。
1. 施工前应将电线、仪表等清除干净，不得有油、水、灰土油污；金属表面应将锈除净，以免影响施工效果。
2. 密封胶泥施工时要填实，其深度不小于50mm。
3. 做料堵的填充物要用不燃性材料，如石棉等。
4. 冬季施工时，如密封胶泥变硬，应将其放在室温内，放置一段时间后再使用，但不能用明火直接烤。
FGA-5防爆电缆夹紧密封接头
1.爆炸性气体混合物危险场所;1区 2区
2.爆炸性气体混合物 IIA IIB IIC
3.温度组别;T1～T6
4.户内 户外(IP65)
For the dangerous sites with explosive air mixture;1.division 2.division
Flammable gas steam class;IIA IIB IIC
Temperatures classification;T1～T6
lndoor and outdoor (IP65)
1.本产品由不锈钢 黄紫铜 优质钢镀锌三种不同材质制成出密封接头,用于夹紧铠装电缆进线处或橡胶电缆进口处,使防爆开关与电缆连接达到密封与防爆要求.符合国际标准,与日本 德国 美国 英国进口电气设备配套.
The product is made by tree different materials Stainless steel yellow red copper and the galvanization of
fine steel The sealed joint is used for claming the inlet of pallet cable or rubber cable so the connection
of explosion-proof switch and the cable can reach the requirement of sealing and explosion-proof.It accords
with international stamdard,and it can fit with the electrical equipment imported from Jatan,German,USA
or England.
DQM-4防爆电缆夹紧密封接头
1.爆炸性气体混合物危险场所;1区 2区
2.爆炸性气体混合物 IIA IIB IIC
3.户内 户外(IP65)
Hazardous location;division 1&2
Explosive gas atmospheres;IIA IIB IIC
lndoor and outdoor(IP65)
本产品由铸铝合金制成,外表面喷塑
The production is made of casting aluminium alloy suface is sprayed with plastics
DQM-3防爆电缆夹紧密封异型接头
1.爆炸性气体混合物危险场所;1区 2区.
2.爆炸性气体混合物 IIA IIB IIC.
3.户内 户外(IP65).
Hazardous location;division 1&2
Explosive gas atmospheres;IIA IIB IIC
lndoor and outdoor(IP65)
1.本产品由铸铝合金制成,外表面镀锌.
The production is made of casting aluminium alloy surface plast is sprayed with plastics
2.钢管穿线.
Wiring with steel tube
QM-2防爆电缆密封接头
1.爆炸性气体混合物危险场所;1区 2区
2.爆炸性气体混合物 IIA IIB IIC
3.户内 户外(IP65)
Hazardous location;division 1&2
Explosive gas atmospheres;IIA IIB IIC
lndoor and outdoor(IP65)
1.本产品由铸铝合金制成,外表面喷塑
The production is made of casting aluminium alloy suface is sprayed with plastics
2.电缆布线
Use cable wiring
BGJ系列防爆管接头(ⅡB ⅡC)
1.爆炸性气体混合物危险场所;1区 2区
2.爆炸性气体混合物 IIA IIB IIC
3.户内 户外(IP54,可按用户要求达到IP65)
本产品由优质碳素钢制成,外表面镀锌
The production is made of qualiy carbon stee surface is coated with zinc
特殊场所防护等级可达IP65
lt could be designed as IP65 according to user s requirements
MBG防爆隔离密封管接头(ⅡB ⅡC)
1.爆炸性气体混合物危险场所;1区 2区
2.爆炸性气体混合物IIA IIB IIC
3.户内 户外(IP54,可按用户要求达到IP65)
1.铸铝合金外壳，表面喷塑。
2.钢管布线。
